工程材料
概要
| 作品: | 767 作品在 767 项出版品 767 种语言 | |
|---|---|---|
书目信息
多晶片模組電子構裝製程技術:子計畫-以濺射法探討氮化鋁多層基板之研製(i)=the investigation of aln multilayer substrate ..
by:
([NT 13] Microfilm)
傳統研磨與蠕動研磨於陶瓷加工之研究=implementation and comparison of neural netwrok learing paradigms:backpropagation,sim
by:
([NT 13] Microfilm)
多晶片模組之基板製成與晶片街合技術的研究:子計畫二-微電子構裝中無焊錫街點之微觀分析(i)=microstucture analysis of unleadet
by:
([NT 13] Microfilm)
線型與交流型聚亞氨薄膜之分子排列,應力分布,吸收與環境應力破裂研究＝molecular orientation,stress distribution,sorption
by:
([NT 13] Microfilm)
半導體薄膜界面反應及結構研究-子計劃四:氮化鈦,金屬及金屬矽化物在矽,鍺,碳化矽晶片上生長行=study of growth behavior and mic
by:
([NT 13] Microfilm)
金屬基複合材料粉末冶金製程與性質之提升研究子計畫四:金屬基複合材料之高溫機械性質探討=studies on high temperature mechanic
by:
([NT 13] Microfilm)
聚參合物結晶動力學與型態學的探討.1 pbt/par=crystallization and morphology of polymer blend 1.pbt/par
by:
([NT 13] Microfilm)
a1230-nia1複合材料及功能梯度複合材料之開發研究=develoment of a1230-nia1 composites and functional gradinet materials
by:
([NT 13] Microfilm)
精密陶瓷之射出成形研究子計畫二:利用非傳統射出成形法製作高強度氧化鋁(ii)=high strength alumina ceramics prepared by non-c
by:
([NT 13] Microfilm)
焚化爐爐條材料高溫腐蝕性質研究子計畫四：焚化爐爐條材料在混合氣氛下之熱腐蝕研究=hot corrosion study of grid materials in
by:
([NT 13] Microfilm)
單輪急速凝固技術連續鑄造aisi 304不繡鋼薄片的製程研究與發展總計畫(iii)=research and development of thin strip casting pro
by:
([NT 13] Microfilm)
單輪急速凝固技術連續鑄造aisi 304不繡鋼薄片的製程研究與發展子計畫二:流量控制與熔湯拉引熔池=reserch and development of thi
by:
([NT 13] Microfilm)
微晶質磁性材料子計劃二:磁光性玻璃之研究(ii)=the magnetic and magneto-optic properties of glass(ii)
by:
([NT 13] Microfilm)
a356鋁合金板狀鑄件之微縮孔定量預測研究=quantitative prediction of the shrinkage porosity formation in olate castings of
by:
([NT 13] Microfilm)
鋁基複合材料熔鑄製程與性質之提升研究(總計劃)=improvements of cating processes and properties of aluminumbased metal matr
by:
([NT 13] Microfilm)
鈦鎳基介金屬氫化物電化學儲氫性質研究(ii)=electrochemical hydrigen strage properties of tini-base metal hydrides
by:
([NT 13] Microfilm)
網印厚膜法研製積層晶片電感器=the film process and materials for mulitlayer ferrite chiip inductor
by:
([NT 13] Microfilm)
磁光記錄巴材製備(子計畫4b)=the target mateer preparation for magneto optical recording medium
by:
([NT 13] Microfilm)
鐵鋁錳合金相變化與機械性質=phase transformations and mechanical properties of fe-al-mn alloys
by:
([NT 13] Microfilm)
利用電弧蒸著法研究高機能性 硬質薄膜之製作與評價=prepation and evaluation of functional solid hard thin films by arc ion
by:
([NT 13] Microfilm)
多晶片模組電子構裝製程技術總計畫=manufacturing technologies of multichip module electronic packaging
by:
([NT 13] Microfilm)
多晶片模組電子構裝製程技術:子計畫一-電子構裝基板金屬化及焊錫隆點製程技術:氧化鋁基板(i)=metallization and solder bump pro
by:
([NT 13] Microfilm)
介金屬化合物之機械合金非晶質化研究(ii)=a study on the amorphization of intermetallic compound by mechanical alloying:par
by:
([NT 13] Microfilm)
麻時效鋼雷射銲件之低應變速率氫脆研究=effect of hydrogen embrittlement and strain rate sensitivity in the laser welds of
by:
([NT 13] Microfilm)
奈米球微影術製備二維規則奈米結構之研究 = Study of Well-Ordered 2D periodic Nanostructure fabricated via Nanosphere ....
by:
(书目-语言数据,印刷品)
ZnO:Sb薄膜成長與光電特性之研究 = The study of optical and electrical properties of ZnO:Sb thin films
by:
(书目-语言数据,印刷品)
鑄造Ti-5Cr及Ti-5Cr-xMo合金之結構與機械性質研究 = Microstructure and mechanical properties of As-Cast Ti-5Cr and ....
by:
(书目-语言数据,印刷品)
主题