大葉大學圖書館 |

Additive and traditionally manufactured components[electronic resource] :a comparative analysis of mechanical properties /

紀錄類型:	書目-電子資源 : Monograph/item
杜威分類號:	621.9/8
書名/作者:	Additive and traditionally manufactured components : a comparative analysis of mechanical properties // Joshua Pelleg.
作者:	Pelleg, Joshua,
出版者:	Amsterdam : : Elsevier,, 2020.
面頁冊數:	1 online resource (658 p.) : : ill.
標題:	Additive manufacturing.
標題:	Electronic books.
ISBN:	012821919X
ISBN:	9780128219195 (electronic bk.)
ISBN:	9780128219188
ISBN:	0128219181
書目註:	Includes bibliographic references and index.
內容註:	Intro -- Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties -- Copyright -- Dedication -- Contents -- Preface -- About the author -- Chapter One: What is additive manufacturing? -- Chapter Two: Fabrication -- 2.1. Fused deposition method (FDM) -- 2.1.1. Melt properties -- 2.1.2. Liquefier -- 2.1.3. Heat convection -- 2.1.4. Pressure drop estimation -- 2.1.5. Layer deposition and stability -- 2.1.6. Road spreading -- 2.1.7. Road cooling and polymer bonding -- 2.2. Powder-bed fusion (PBF) -- 2.3. Inkjet printing -- 2.4. Stereolithography (SLA)
電子資源:	https://www.sciencedirect.com/science/book/9780128219188

Additive and traditionally manufactured components[electronic resource] :a comparative analysis of mechanical properties /
Pelleg, Joshua,

Additive and traditionally manufactured componentsa comparative analysis of mechanical properties /[electronic resource] :Joshua Pelleg. - Amsterdam :Elsevier,2020. - 1 online resource (658 p.) :ill.

Includes bibliographic references and index.

Intro -- Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties -- Copyright -- Dedication -- Contents -- Preface -- About the author -- Chapter One: What is additive manufacturing? -- Chapter Two: Fabrication -- 2.1. Fused deposition method (FDM) -- 2.1.1. Melt properties -- 2.1.2. Liquefier -- 2.1.3. Heat convection -- 2.1.4. Pressure drop estimation -- 2.1.5. Layer deposition and stability -- 2.1.6. Road spreading -- 2.1.7. Road cooling and polymer bonding -- 2.2. Powder-bed fusion (PBF) -- 2.3. Inkjet printing -- 2.4. Stereolithography (SLA)

ISBN: 012821919XSubjects--Topical Terms:

753127
Additive manufacturing.
Index Terms--Genre/Form:

336502
Electronic books.

LC Class. No.: TS183.25

Dewey Class. No.: 621.9/8

Additive and traditionally manufactured components[electronic resource] :a comparative analysis of mechanical properties /
LDR:07352cmm a2200313 a 4500 001 525211
006 m o d
007 cr un|---aucuu
008 230513s2020 ne a ob 001 0 eng d
020 $a 012821919X
020 $a 9780128219195 (electronic bk.)
020 $a 9780128219188
020 $a 0128219181
035 $a on1153874947
040 $a EBLCP $b eng $c EBLCP $d YDX $d OPELS $d EBLCP $d OCLCF $d UKAHL $d UKMGB $d NWQ $d N$T $d OCLCO $d SFB $d OCLCO $d OCL
041 0 $a eng
050 4 $a TS183.25
082 0 4 $a 621.9/8 $2 23
100 1 $a Pelleg, Joshua, $e author. $3 716098
245 1 0 $a Additive and traditionally manufactured components $h [electronic resource] : $b a comparative analysis of mechanical properties / $c Joshua Pelleg.
260 $a Amsterdam : $b Elsevier, $c 2020.
300 $a 1 online resource (658 p.) : $b ill.
504 $a Includes bibliographic references and index.
505 0 $a Intro -- Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties -- Copyright -- Dedication -- Contents -- Preface -- About the author -- Chapter One: What is additive manufacturing? -- Chapter Two: Fabrication -- 2.1. Fused deposition method (FDM) -- 2.1.1. Melt properties -- 2.1.2. Liquefier -- 2.1.3. Heat convection -- 2.1.4. Pressure drop estimation -- 2.1.5. Layer deposition and stability -- 2.1.6. Road spreading -- 2.1.7. Road cooling and polymer bonding -- 2.2. Powder-bed fusion (PBF) -- 2.3. Inkjet printing -- 2.4. Stereolithography (SLA)
505 8 $a 2.4.1. The state of the resin (photopolymer) -- 2.4.2. The maximum cure depth -- 2.4.3. The cured line width -- 2.4.4. Laser scan velocity -- 2.5. Direct energy deposition (DED) -- 2.5.1. Thermal model -- 2.6. Laminated object manufacturing (LOM) -- References -- Further reading -- Chapter Three: Testing: Comparison of AM data with traditionally fabricated -- 3.1. Tensile tests -- 3.1.1. Ti-6Al-4V: AM tensile properties -- 3.1.2. Al alloy AA6061: AM tensile properties -- 3.1.2.1. Conventionally produced (AM) AA6061 -- 3.1.3. Stainless steel 304L: AM tensile properties
505 8 $a 3.1.3.1. Conventionally produced SS 304L -- 3.1.4. Ceramic -- 3.1.4.1. AM alumina -- 3.1.4.2. Conventionally fabricated alumina -- 3.2. Compression tests -- 3.2.1. Ti-6Al-4V -- 3.2.2. Conventionally fabricated Ti-6Al-4V -- 3.2.3. Al alloys-Al 60613 -- 3.2.4. Conventionally fabricated Al 6061 -- 3.2.5. AM stainless steel 304L -- 3.2.5.1. Conventionally fabricated stainless steel 304L -- 3.2.6. Ceramics-Alumina -- 3.2.7. Conventionally fabricated alumina (Al2O3) -- 3.2.7.1. Effect of orientation and temperature -- 3.3. Indentation (hardness) -- 3.3.1. Ti-6Al-4V
505 8 $a 3.3.1.1. Conventionally produced Ti-6Al-4V -- 3.3.2. Aluminum alloy (Al6061) -- 3.3.3. Conventionally fabricated Al 6061 -- 3.3.4. Stainless steel 304L -- 3.3.4.1. Conventionally produced 304L stainless steel -- 3.3.5. Alumina -- 3.3.6. Conventionally produced alumina -- 3.3.6.1. Temperature dependence -- 3.3.6.2. Hardness of coatings -- 3.3.6.3. Hardness of alumina films -- References -- Further reading -- Chapter Four: Dislocations in AM and traditional manufacturing: A comparison -- 4.1. Introduction -- 4.1.1. In AM Ti-6Al-4V -- 4.1.2. In traditionally fabricated Ti-6Al-4V
505 8 $a 4.1.3. Motion of dislocations -- 4.2. Introduction AA6061 -- 4.2.1. AM of AA6061 Al alloy -- 4.2.2. Dislocations in conventionally produced Al AA6061 -- 4.2.2.1. Pinning of dislocations in 6061 -- 4.2.2.2. The strain effect in 6061 -- 4.3. In stainless steel 304L -- 4.3.1. Introduction -- 4.3.2. In AM 304L stainless steel -- 4.3.3. In conventionally fabricated 304L stainless steel -- 4.4. In alumina (Al2O3) -- 4.4.1. In conventionally fabricated alumina -- References -- Further reading -- Chapter Five: Deformation in AM and traditional manufacturing: A comparison -- 5.1. Introduction
505 8 $a 5.1.1. Deformation in AM Ti-6Al-4V -- 5.1.2. In traditionally fabricated Ti-6Al-4V -- 5.1.2.1. Tensile deformation -- 5.1.2.2. Compressive deformation -- 5.2. Deformation in AM Al AA6061 -- 5.2.1. Tensile deformation in Al AA6061 -- 5.2.2. Compressive deformation -- 5.2.3. Conventional tensile deformation -- 5.2.4. Conventional compressive deformation -- 5.3. AM stainless steel 304L -- 5.3.1. Tensile deformation -- 5.3.2. Compression deformation -- 5.3.3. Conventionally produced SS 304L -- 5.3.3.1. Tensile deformation in conventionally produced SS 304L -- 5.3.3.2. Compressive deformation in conventionally produced SS 304L -- 5.4. Deformation in alumina -- 5.4.1. Compressive deformation of AM alumina -- 5.4.2. Hardness -- 6.1. Introduction -- 6.2. Dynamic deformation of AM Ti-6Al-4V -- 6.2.1. Tensile test of AM Ti-6Al-4V -- 6.2.2. Tensile test of CP Ti-6Al-4V -- 6.3. Compression tests -- 6.3.1. In AM Ti-6Al-4V -- 6.3.2. In CP Ti-6Al-4V -- 6.3.3. Twinning in Ti-6Al-4V -- 6.4. Dynamic deformation in Al AA6061 -- 6.4.1. Tension test in AM AlSi10Mg -- 6.4.2. Compression test in AM Al Si10Mg -- 6.4.3. Tensile test in CP AA6061 -- 6.4.4. Compression test in CP Al 6061 -- 6.4.5. Tensile test in AM SS 304L -- 6.4.6. Compression test in AM SS 304L -- 6.4.7. Tensile test in CP 304L SS -- 6.4.8. Compression test in CP 304L SS -- 6.5. Dynamic deformation in alumina (Al2O3) -- 6.5.1. Tension test in AM alumina -- 6.5.2. Compression test in AM alumina -- 6.5.3. Hardness in AM alumina -- 6.5.4. Tensile test in CP alumina (Al2O3) -- 6.5.5. Compression test in CP alumina (Al2O3) -- 7.1. Introduction -- 7.2. Tensile creep in AM Ti6Al4V -- 7.3. Compressive creep in AM Ti6Al4V -- 7.4. Tensile creep in CP Ti6Al4V -- 7.5. Compressive creep in CP Ti6Al4V -- 7.6. Tensile creep in AM Al10SiMg -- 7.7. Tensile creep in CP Al AA6061 -- 7.8. Compressive creep in CP Al AA6061 -- 8.1. Introduction to fatigue -- 8.2. Fatigue in AM Ti6Al4V -- 8.2.1. High cycle fatigue -- 8.2.2. Low cycle fatigue -- 8.2.3. Rough surface and notch effect -- 8.3. Fatigue in conventionally fabricated Ti6Al4V -- 8.3.1. High cycle fatigue -- 8.3.2. Low cycle fatigue -- 8.3.3. Rough surface and notch effect -- 8.4. Fatigue in conventionally fabricated Al AA6061 -- 8.4.1. High cycle fatigue in Al 6061 -- 8.4.2. Low cycle fatigue -- 8.5. The Massing hypothesis -- 8.5.1. Rough surface and notch effect -- 8.6. Fatigue in AM SS 304L -- 8.6.1. Hgh cycle fatigue -- 8.6.2. Fatigue in CP SS 304L -- 8.6.2.1. High cycle fatigue -- 9.1. Fracture in AM Ti-6Al-4V -- 9.2. Fracture in AM Al AA6061 -- 9.3. Fracture in AM SS 316L -- 9.4. Fracture in AM alumina -- 9.5. Fracture in CP Ti-6Al-4V -- 9.6. Fracture in CP Al AA6061 -- 9.7. Fracture in CP SS 304L -- 9.7.1. Strain rate effects in CP SS 304L -- 9.7.2. Hydrogen effects in CP SS 304L--Hydrogen embrittlement -- 9.7.2.1. Introduction -- 9.8. Fracture in CP alumina -- 10.1. Tensile properties -- 10.1.1. AM Ti6Al4V -- 10.1.2. CP Ti6Al4V -- 10.1.3. AM of nano-316L SS -- 10.1.4. CP nano-316L SS -- 10.1.4.1. CP nano-316L and 304L SS -- 10.1.4.2. CP nano-304L SS -- 10.2. Compressive properties -- 10.2.1. AM of nano-alumina -- 10.2.2. CP of nano-alumina -- 10.3. Indentation hardness in nanomaterials -- 10.3.1. Introduction -- 10.3.2. Hardness in AM nano-alumina -- 10.3.3. Hardness in CP nano-alumina -- Chapter Eleven - Epilogue -- Index.
588 0 $a Description based on online resource, title from digital title page (viewed on February 10, 2020).
650 0 $a Additive manufacturing. $3 753127
650 0 $a Electronic books. $2 local $3 376747
655 4 $a Electronic books. $2 local $3 336502
856 4 0 $u https://www.sciencedirect.com/science/book/9780128219188