大葉大學圖書館 |

1D oxide nanostructures obtained by sol-gel and hydrothermal methods[electronic resource] /

紀錄類型:	書目-電子資源 : Monograph/item
杜威分類號:	620.115
書名/作者:	1D oxide nanostructures obtained by sol-gel and hydrothermal methods/ by Crina Anastasescu ... [et al.].
其他作者:	Anastasescu, Crina.
出版者:	Cham : : Springer International Publishing :, 2016.
面頁冊數:	viii, 82 p. : : ill., digital ;; 24 cm.
Contained By:	Springer eBooks
標題:	Ceramics, Glass, Composites, Natural Methods.
標題:	Nanochemistry.
標題:	Nanoscale Science and Technology.
標題:	Optical and Electronic Materials.
標題:	Optics, Lasers, Photonics, Optical Devices.
標題:	Catalysis.
標題:	Nanostructured materials.
標題:	Materials Science.
ISBN:	9783319329888
ISBN:	9783319329864
內容註:	Introduction (general considerations on the 1 D oxide nanostructures) -- Synthesis of oxide nanotubes by sol-gel method -- Synthesis of oxide nanotubes/nanorods by hydrothermal method.
摘要、提要註:	This book presents wet chemical sol-gel and hydrothermal methods for 1D oxide nanostructure preparation. These methods represent an attractive route to multifunctional nanomaterials synthesis, as they are versatile, inexpensive and, thus, appropriate for obtaining a wide range of oxide materials with tailored morphology and properties. Three specific oxides (SiO2, TiO2, ZnO) are discussed in detail in order to illustrate the principle of the sol-gel and hydrothermal preparation of 1D oxide nanostructures. Other oxides synthesized via this method are also briefly presented. Throughout the book, the correlation between the tubular structure and the physico-chemical properties of these materials is highlighted. 1D oxide nanostructures exhibit interesting optical and electrical properties, due to their confined morphology. In addition, a well-defined geometry can be associated with chemically active species. For example, the pure SiO2 nanotubes presented a slight photocatalytic activity, while the Pt-doped SiO2 tubular materials act as microreactors in catalytic reactions. In the case of titania and titanate nanotubes, large specific surface area and pore volume, ion-exchange ability, enhanced light absorption, and fast electron-transport capability have attracted significant research interest. The chemical and physical modifications (microwave assisted hydrothermal methods) discussed here improve the formation kinetics of the nanotubes. The ZnO nanorods/tubes were prepared as random particles or as large areas of small, oriented 1D ZnO nanostructures on a variety of substrates. In the latter case a sol-gel layer is deposited on the substrate prior to the hydrothermal preparation. Using appropriate dopants, coatings of ZnO nanorods with controlled electrical behavior can be obtained.
電子資源:	http://dx.doi.org/10.1007/978-3-319-32988-8

1D oxide nanostructures obtained by sol-gel and hydrothermal methods[electronic resource] /
1D oxide nanostructures obtained by sol-gel and hydrothermal methods[electronic resource] /by Crina Anastasescu ... [et al.]. - Cham :Springer International Publishing :2016. - viii, 82 p. :ill., digital ;24 cm. - SpringerBriefs in materials,2192-1091. - SpringerBriefs in materials..

Introduction (general considerations on the 1 D oxide nanostructures) -- Synthesis of oxide nanotubes by sol-gel method -- Synthesis of oxide nanotubes/nanorods by hydrothermal method.

This book presents wet chemical sol-gel and hydrothermal methods for 1D oxide nanostructure preparation. These methods represent an attractive route to multifunctional nanomaterials synthesis, as they are versatile, inexpensive and, thus, appropriate for obtaining a wide range of oxide materials with tailored morphology and properties. Three specific oxides (SiO2, TiO2, ZnO) are discussed in detail in order to illustrate the principle of the sol-gel and hydrothermal preparation of 1D oxide nanostructures. Other oxides synthesized via this method are also briefly presented. Throughout the book, the correlation between the tubular structure and the physico-chemical properties of these materials is highlighted. 1D oxide nanostructures exhibit interesting optical and electrical properties, due to their confined morphology. In addition, a well-defined geometry can be associated with chemically active species. For example, the pure SiO2 nanotubes presented a slight photocatalytic activity, while the Pt-doped SiO2 tubular materials act as microreactors in catalytic reactions. In the case of titania and titanate nanotubes, large specific surface area and pore volume, ion-exchange ability, enhanced light absorption, and fast electron-transport capability have attracted significant research interest. The chemical and physical modifications (microwave assisted hydrothermal methods) discussed here improve the formation kinetics of the nanotubes. The ZnO nanorods/tubes were prepared as random particles or as large areas of small, oriented 1D ZnO nanostructures on a variety of substrates. In the latter case a sol-gel layer is deposited on the substrate prior to the hydrothermal preparation. Using appropriate dopants, coatings of ZnO nanorods with controlled electrical behavior can be obtained.

ISBN: 9783319329888

Standard No.: 10.1007/978-3-319-32988-8doiSubjects--Topical Terms:

463795
Ceramics, Glass, Composites, Natural Methods.

LC Class. No.: TA418.9.N35

Dewey Class. No.: 620.115

1D oxide nanostructures obtained by sol-gel and hydrothermal methods[electronic resource] /
LDR:03030nmm a2200325 a 4500 001 465432
003 DE-He213
005 20160830144747.0
006 m d
007 cr nn 008maaau
008 170411s2016 gw s 0 eng d
020 $a 9783319329888 $q (electronic bk.)
020 $a 9783319329864 $q (paper)
024 7 $a 10.1007/978-3-319-32988-8 $2 doi
035 $a 978-3-319-32988-8
040 $a GP $c GP
041 0 $a eng
050 4 $a TA418.9.N35
072 7 $a TDCQ $2 bicssc
072 7 $a TEC021000 $2 bisacsh
082 0 4 $a 620.115 $2 23
090 $a TA418.9.N35 $b O58 2016
245 0 0 $a 1D oxide nanostructures obtained by sol-gel and hydrothermal methods $h [electronic resource] / $c by Crina Anastasescu ... [et al.].
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2016.
300 $a viii, 82 p. : $b ill., digital ; $c 24 cm.
490 1 $a SpringerBriefs in materials, $x 2192-1091
505 0 $a Introduction (general considerations on the 1 D oxide nanostructures) -- Synthesis of oxide nanotubes by sol-gel method -- Synthesis of oxide nanotubes/nanorods by hydrothermal method.
520 $a This book presents wet chemical sol-gel and hydrothermal methods for 1D oxide nanostructure preparation. These methods represent an attractive route to multifunctional nanomaterials synthesis, as they are versatile, inexpensive and, thus, appropriate for obtaining a wide range of oxide materials with tailored morphology and properties. Three specific oxides (SiO2, TiO2, ZnO) are discussed in detail in order to illustrate the principle of the sol-gel and hydrothermal preparation of 1D oxide nanostructures. Other oxides synthesized via this method are also briefly presented. Throughout the book, the correlation between the tubular structure and the physico-chemical properties of these materials is highlighted. 1D oxide nanostructures exhibit interesting optical and electrical properties, due to their confined morphology. In addition, a well-defined geometry can be associated with chemically active species. For example, the pure SiO2 nanotubes presented a slight photocatalytic activity, while the Pt-doped SiO2 tubular materials act as microreactors in catalytic reactions. In the case of titania and titanate nanotubes, large specific surface area and pore volume, ion-exchange ability, enhanced light absorption, and fast electron-transport capability have attracted significant research interest. The chemical and physical modifications (microwave assisted hydrothermal methods) discussed here improve the formation kinetics of the nanotubes. The ZnO nanorods/tubes were prepared as random particles or as large areas of small, oriented 1D ZnO nanostructures on a variety of substrates. In the latter case a sol-gel layer is deposited on the substrate prior to the hydrothermal preparation. Using appropriate dopants, coatings of ZnO nanorods with controlled electrical behavior can be obtained.
650 2 4 $a Ceramics, Glass, Composites, Natural Methods. $3 463795
650 2 4 $a Nanochemistry. $3 463744
650 2 4 $a Nanoscale Science and Technology. $3 464259
650 2 4 $a Optical and Electronic Materials. $3 463742
650 2 4 $a Optics, Lasers, Photonics, Optical Devices. $3 669483
650 2 4 $a Catalysis. $3 419032
650 0 $a Nanostructured materials. $3 339604
650 1 4 $a Materials Science. $3 463741
700 1 $a Anastasescu, Crina. $3 669482
710 2 $a SpringerLink (Online service) $3 463450
773 0 $t Springer eBooks
830 0 $a SpringerBriefs in materials. $3 465481
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-32988-8
950 $a Chemistry and Materials Science (Springer-11644)