大葉大學圖書館 |

Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints[electronic resource] /

紀錄類型:	書目-電子資源 : Monograph/item
杜威分類號:	671.5
書名/作者:	Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints/ by Tomasz Sadowski, Tadeusz Balawender, Przemyslaw Golewski.
作者:	Sadowski, Tomasz.
其他作者:	Balawender, Tadeusz.
出版者:	Cham : : Springer International Publishing :, 2015.
面頁冊數:	vii, 59 p. : : ill., digital ;; 24 cm.
Contained By:	Springer eBooks
標題:	Adhesive joints.
標題:	Adhesive joints - Mathematical models.
標題:	Engineering.
標題:	Operating Procedures, Materials Treatment.
標題:	Characterization and Evaluation of Materials.
標題:	Light Construction, Steel Construction, Timber Construction.
標題:	Structural Mechanics.
ISBN:	9783319149028 (electronic bk.)
ISBN:	9783319149011 (paper)
內容註:	1 Introduction -- 2 Clinching technology -- 3 Ability to clinching Influence of contact conditions on forming process and strength of clinched joints -- 4 Adhesive bonding and adhesive type bonding joints -- 5 Numerical model applied for modeling of simple and hybrid joints -- 6 Clinch-adhesive joints -- 7 Summary.
摘要、提要註:	This short book describes the basic technological aspects involved in the creation of purely clinch and clinch-adhesive joints made of different types of adherent materials and employing different joining technologies. Basic parameters that need to be taken into account in the design process are also presented, while a comparison of experimental testing of the hybrid joint with simple clinching for a combination of different joining materials underlines the advantages of opting for hybrid joints. The book's conclusions will facilitate the practical application of this new fastening technology.
電子資源:	http://dx.doi.org/10.1007/978-3-319-14902-8

Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints[electronic resource] /
Sadowski, Tomasz.

Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints[electronic resource] /by Tomasz Sadowski, Tadeusz Balawender, Przemyslaw Golewski. - Cham :Springer International Publishing :2015. - vii, 59 p. :ill., digital ;24 cm. - SpringerBriefs in Applied Sciences and Technology, Computational mechanics,2191-530X. - SpringerBriefs in applied sciences and technology. |p Computational mechanics..

1 Introduction -- 2 Clinching technology -- 3 Ability to clinching Influence of contact conditions on forming process and strength of clinched joints -- 4 Adhesive bonding and adhesive type bonding joints -- 5 Numerical model applied for modeling of simple and hybrid joints -- 6 Clinch-adhesive joints -- 7 Summary.

This short book describes the basic technological aspects involved in the creation of purely clinch and clinch-adhesive joints made of different types of adherent materials and employing different joining technologies. Basic parameters that need to be taken into account in the design process are also presented, while a comparison of experimental testing of the hybrid joint with simple clinching for a combination of different joining materials underlines the advantages of opting for hybrid joints. The book's conclusions will facilitate the practical application of this new fastening technology.

ISBN: 9783319149028 (electronic bk.)

Standard No.: 10.1007/978-3-319-14902-8doiSubjects--Topical Terms:

550104
Adhesive joints.

LC Class. No.: TA492.A3

Dewey Class. No.: 671.5

Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints[electronic resource] /
LDR:02048nmm a2200337 a 4500 001 438854
003 DE-He213
005 20151228120005.0
006 m d
007 cr nn 008maaau
008 160315s2015 gw s 0 eng d
020 $a 9783319149028 (electronic bk.)
020 $a 9783319149011 (paper)
024 7 $a 10.1007/978-3-319-14902-8 $2 doi
035 $a 978-3-319-14902-8
040 $a GP $c GP
041 0 $a eng
050 4 $a TA492.A3
072 7 $a TGXW $2 bicssc
072 7 $a TEC040000 $2 bisacsh
072 7 $a TEC020000 $2 bisacsh
082 0 4 $a 671.5 $2 23
090 $a TA492.A3 $b S126 2015
100 1 $a Sadowski, Tomasz. $3 605493
245 1 0 $a Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints $h [electronic resource] / $c by Tomasz Sadowski, Tadeusz Balawender, Przemyslaw Golewski.
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2015.
300 $a vii, 59 p. : $b ill., digital ; $c 24 cm.
490 1 $a SpringerBriefs in Applied Sciences and Technology, Computational mechanics, $x 2191-530X
505 0 $a 1 Introduction -- 2 Clinching technology -- 3 Ability to clinching Influence of contact conditions on forming process and strength of clinched joints -- 4 Adhesive bonding and adhesive type bonding joints -- 5 Numerical model applied for modeling of simple and hybrid joints -- 6 Clinch-adhesive joints -- 7 Summary.
520 $a This short book describes the basic technological aspects involved in the creation of purely clinch and clinch-adhesive joints made of different types of adherent materials and employing different joining technologies. Basic parameters that need to be taken into account in the design process are also presented, while a comparison of experimental testing of the hybrid joint with simple clinching for a combination of different joining materials underlines the advantages of opting for hybrid joints. The book's conclusions will facilitate the practical application of this new fastening technology.
650 0 $a Adhesive joints. $3 550104
650 0 $a Adhesive joints $x Mathematical models. $3 464731
650 1 4 $a Engineering. $3 372756
650 2 4 $a Operating Procedures, Materials Treatment. $3 463772
650 2 4 $a Characterization and Evaluation of Materials. $3 463765
650 2 4 $a Light Construction, Steel Construction, Timber Construction. $3 605424
650 2 4 $a Structural Mechanics. $3 464584
700 1 $a Balawender, Tadeusz. $3 626369
700 1 $a Golewski, Przemyslaw. $3 626370
710 2 $a SpringerLink (Online service) $3 463450
773 0 $t Springer eBooks
830 0 $a SpringerBriefs in applied sciences and technology. |p Computational mechanics. $3 626371
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-14902-8
950 $a Engineering (Springer-11647)