語系:
繁體中文
English
日文
簡体中文
說明(常見問題)
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
CMOS circuits for piezoelectric ener...
~
Hehn, Thorsten.
CMOS circuits for piezoelectric energy harvesters[electronic resource] :efficient power extraction, interface modeling and loss analysis /
紀錄類型:
書目-語言資料,印刷品 : Monograph/item
杜威分類號:
621.3815
書名/作者:
CMOS circuits for piezoelectric energy harvesters : efficient power extraction, interface modeling and loss analysis // by Thorsten Hehn, Yiannos Manoli.
作者:
Hehn, Thorsten.
其他作者:
Manoli, Yiannos.
出版者:
Dordrecht : : Springer Netherlands :, 2015.
面頁冊數:
xvii, 204 p. : : ill., digital ;; 24 cm.
Contained By:
Springer eBooks
標題:
Electronic circuits.
標題:
Electronic apparatus and appliances.
標題:
Piezoelectric devices.
標題:
Physics.
標題:
Electronic Circuits and Devices.
標題:
Energy Harvesting.
標題:
Circuits and Systems.
標題:
Power Electronics, Electrical Machines and Networks.
ISBN:
9789401792882 (electronic bk.)
ISBN:
9789401792875 (paper)
內容註:
1 Introduction -- 2 Piezoelectricity and Energy Harvester Modelling -- 3 Analysis of Different Interface Circuits -- 4 Theory of the Proposed PSCE Circuit -- 5 Implementation of the PSCE Circuit on Transistor Level -- 6 Performance Analysis of the PSCE Chip -- 7 Conclusions and Outlook. References -- Appendix A Mathematical Calculations -- A.1 Solution of the Linear Differential Equation Systems -- A.2 Flux Property -- A.3 Trigonometric Relations -- A.4 Numerical Calculation.
摘要、提要註:
This book deals with the challenge of exploiting ambient vibrational energy which can be used to power small and low-power electronic devices, e.g. wireless sensor nodes. Generally, particularly for low voltage amplitudes, low-loss rectification is required to achieve high conversion efficiency. In the special case of piezoelectric energy harvesting, pulsed charge extraction has the potential to extract more power compared to a single rectifier. For this purpose, a fully autonomous CMOS integrated interface circuit for piezoelectric generators which fulfills these requirements is presented. Due to these key properties enabling universal usage, other CMOS designers working in the field of energy harvesting will be encouraged to use some of the shown structures for their own implementations. The book is unique in the sense that it highlights the design process from scratch to the final chip. Hence, it gives the designer a comprehensive guide of how to (i) setup an appropriate harvester model to get realistic simulation results, (ii) design the integrated circuits for low power operation, (iii) setup a laboratory measurement environment in order to extensively characterize the chip in combination with the real harvester, and finally, (iv) interpret the simulation/measurement results in order to improve the chip performance. Since the dimensions of all devices (transistors, resistors etc.) are given, readers and other designers can easily re-use the presented circuit concepts.
電子資源:
http://dx.doi.org/10.1007/978-94-017-9288-2
CMOS circuits for piezoelectric energy harvesters[electronic resource] :efficient power extraction, interface modeling and loss analysis /
Hehn, Thorsten.
CMOS circuits for piezoelectric energy harvesters
efficient power extraction, interface modeling and loss analysis /[electronic resource] :by Thorsten Hehn, Yiannos Manoli. - Dordrecht :Springer Netherlands :2015. - xvii, 204 p. :ill., digital ;24 cm. - Springer series in advanced microelectronics,v.381437-0387 ;. - Springer series in advanced microelectronics ;33..
1 Introduction -- 2 Piezoelectricity and Energy Harvester Modelling -- 3 Analysis of Different Interface Circuits -- 4 Theory of the Proposed PSCE Circuit -- 5 Implementation of the PSCE Circuit on Transistor Level -- 6 Performance Analysis of the PSCE Chip -- 7 Conclusions and Outlook. References -- Appendix A Mathematical Calculations -- A.1 Solution of the Linear Differential Equation Systems -- A.2 Flux Property -- A.3 Trigonometric Relations -- A.4 Numerical Calculation.
This book deals with the challenge of exploiting ambient vibrational energy which can be used to power small and low-power electronic devices, e.g. wireless sensor nodes. Generally, particularly for low voltage amplitudes, low-loss rectification is required to achieve high conversion efficiency. In the special case of piezoelectric energy harvesting, pulsed charge extraction has the potential to extract more power compared to a single rectifier. For this purpose, a fully autonomous CMOS integrated interface circuit for piezoelectric generators which fulfills these requirements is presented. Due to these key properties enabling universal usage, other CMOS designers working in the field of energy harvesting will be encouraged to use some of the shown structures for their own implementations. The book is unique in the sense that it highlights the design process from scratch to the final chip. Hence, it gives the designer a comprehensive guide of how to (i) setup an appropriate harvester model to get realistic simulation results, (ii) design the integrated circuits for low power operation, (iii) setup a laboratory measurement environment in order to extensively characterize the chip in combination with the real harvester, and finally, (iv) interpret the simulation/measurement results in order to improve the chip performance. Since the dimensions of all devices (transistors, resistors etc.) are given, readers and other designers can easily re-use the presented circuit concepts.
ISBN: 9789401792882 (electronic bk.)
Standard No.: 10.1007/978-94-017-9288-2doiSubjects--Topical Terms:
384285
Electronic circuits.
LC Class. No.: TK7867
Dewey Class. No.: 621.3815
CMOS circuits for piezoelectric energy harvesters[electronic resource] :efficient power extraction, interface modeling and loss analysis /
LDR
:03101nam a2200337 a 4500
001
424428
003
DE-He213
005
20150515103106.0
006
m d
007
cr nn 008maaau
008
151119s2015 ne s 0 eng d
020
$a
9789401792882 (electronic bk.)
020
$a
9789401792875 (paper)
024
7
$a
10.1007/978-94-017-9288-2
$2
doi
035
$a
978-94-017-9288-2
040
$a
GP
$c
GP
041
0
$a
eng
050
4
$a
TK7867
072
7
$a
TJFC
$2
bicssc
072
7
$a
TJFD5
$2
bicssc
072
7
$a
TEC008010
$2
bisacsh
082
0 4
$a
621.3815
$2
23
090
$a
TK7867
$b
.H464 2015
100
1
$a
Hehn, Thorsten.
$3
602225
245
1 0
$a
CMOS circuits for piezoelectric energy harvesters
$h
[electronic resource] :
$b
efficient power extraction, interface modeling and loss analysis /
$c
by Thorsten Hehn, Yiannos Manoli.
260
$a
Dordrecht :
$b
Springer Netherlands :
$b
Imprint: Springer,
$c
2015.
300
$a
xvii, 204 p. :
$b
ill., digital ;
$c
24 cm.
490
1
$a
Springer series in advanced microelectronics,
$x
1437-0387 ;
$v
v.38
505
0
$a
1 Introduction -- 2 Piezoelectricity and Energy Harvester Modelling -- 3 Analysis of Different Interface Circuits -- 4 Theory of the Proposed PSCE Circuit -- 5 Implementation of the PSCE Circuit on Transistor Level -- 6 Performance Analysis of the PSCE Chip -- 7 Conclusions and Outlook. References -- Appendix A Mathematical Calculations -- A.1 Solution of the Linear Differential Equation Systems -- A.2 Flux Property -- A.3 Trigonometric Relations -- A.4 Numerical Calculation.
520
$a
This book deals with the challenge of exploiting ambient vibrational energy which can be used to power small and low-power electronic devices, e.g. wireless sensor nodes. Generally, particularly for low voltage amplitudes, low-loss rectification is required to achieve high conversion efficiency. In the special case of piezoelectric energy harvesting, pulsed charge extraction has the potential to extract more power compared to a single rectifier. For this purpose, a fully autonomous CMOS integrated interface circuit for piezoelectric generators which fulfills these requirements is presented. Due to these key properties enabling universal usage, other CMOS designers working in the field of energy harvesting will be encouraged to use some of the shown structures for their own implementations. The book is unique in the sense that it highlights the design process from scratch to the final chip. Hence, it gives the designer a comprehensive guide of how to (i) setup an appropriate harvester model to get realistic simulation results, (ii) design the integrated circuits for low power operation, (iii) setup a laboratory measurement environment in order to extensively characterize the chip in combination with the real harvester, and finally, (iv) interpret the simulation/measurement results in order to improve the chip performance. Since the dimensions of all devices (transistors, resistors etc.) are given, readers and other designers can easily re-use the presented circuit concepts.
650
0
$a
Electronic circuits.
$3
384285
650
0
$a
Electronic apparatus and appliances.
$3
341077
650
0
$a
Piezoelectric devices.
$3
405444
650
1 4
$a
Physics.
$3
171863
650
2 4
$a
Electronic Circuits and Devices.
$3
463910
650
2 4
$a
Energy Harvesting.
$3
463606
650
2 4
$a
Circuits and Systems.
$3
463473
650
2 4
$a
Power Electronics, Electrical Machines and Networks.
$3
464716
700
1
$a
Manoli, Yiannos.
$3
468337
710
2
$a
SpringerLink (Online service)
$3
463450
773
0
$t
Springer eBooks
830
0
$a
Springer series in advanced microelectronics ;
$v
33.
$3
464642
856
4 0
$u
http://dx.doi.org/10.1007/978-94-017-9288-2
950
$a
Physics and Astronomy (Springer-11651)
筆 0 讀者評論
多媒體
多媒體檔案
http://dx.doi.org/10.1007/978-94-017-9288-2
評論
新增評論
分享你的心得
Export
取書館別
處理中
...
變更密碼
登入