語系:
繁體中文
English
日文
簡体中文
說明(常見問題)
登入
回首頁
到查詢結果
[ author_sort:"mahto, rakeshkumar v." ]
切換:
標籤
|
MARC模式
|
ISBD
Fault Resilient and Reconfigurable P...
~
Mahto, Rakeshkumar V.
Fault Resilient and Reconfigurable Power Management Using Photovoltaic Integrated with CMOS Switches.
紀錄類型:
書目-電子資源 : Monograph/item
書名/作者:
Fault Resilient and Reconfigurable Power Management Using Photovoltaic Integrated with CMOS Switches.
作者:
Mahto, Rakeshkumar V.
出版者:
Ann Arbor : : ProQuest Dissertations & Theses, , 2016
面頁冊數:
80 p.
附註:
Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.
Contained By:
Dissertation Abstracts International78-03B(E).
標題:
Electrical engineering.
標題:
Alternative Energy.
ISBN:
9781369107203
摘要、提要註:
A Photovoltaic (PV) cell is a device which converts light incident upon it to electric current. The push for green energy due to global warming and diminution of fossil fuels opens up a huge market for PV cells. Hence, a lot of interest is being garnered for using PV cells for various applications. However, a PV module's performance degrades due to many anomalies such as failure of individual PV cell within a module, the opening of interconnection, a short circuit in the connection, failure of bypass diode, failure in voltage regulator or partial shading. To some extent all of these issues can be addressed by introducing a transistor as a switch in a PV module. This kind of architecture also enables the PV module to switch between high voltage with low current or high current with low voltage. Moreover, such architecture is handy when PV modules are deployed at remote locations where manual intervention in the case of fault or power management becomes too expensive or impossible. With advancements in semiconductor processing, the MOSFET switches can now be integrated with a PV cell for improved reliability. In this research project, we introduced addressable switches for PV cell that enable the creation of real-time reconfigurable power buses or power island.
Fault Resilient and Reconfigurable Power Management Using Photovoltaic Integrated with CMOS Switches.
Mahto, Rakeshkumar V.
Fault Resilient and Reconfigurable Power Management Using Photovoltaic Integrated with CMOS Switches.
- Ann Arbor : ProQuest Dissertations & Theses, 2016 - 80 p.
Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.
Thesis (Ph.D.)--The University of New Mexico, 2016.
A Photovoltaic (PV) cell is a device which converts light incident upon it to electric current. The push for green energy due to global warming and diminution of fossil fuels opens up a huge market for PV cells. Hence, a lot of interest is being garnered for using PV cells for various applications. However, a PV module's performance degrades due to many anomalies such as failure of individual PV cell within a module, the opening of interconnection, a short circuit in the connection, failure of bypass diode, failure in voltage regulator or partial shading. To some extent all of these issues can be addressed by introducing a transistor as a switch in a PV module. This kind of architecture also enables the PV module to switch between high voltage with low current or high current with low voltage. Moreover, such architecture is handy when PV modules are deployed at remote locations where manual intervention in the case of fault or power management becomes too expensive or impossible. With advancements in semiconductor processing, the MOSFET switches can now be integrated with a PV cell for improved reliability. In this research project, we introduced addressable switches for PV cell that enable the creation of real-time reconfigurable power buses or power island.
ISBN: 9781369107203Subjects--Topical Terms:
183930
Electrical engineering.
Fault Resilient and Reconfigurable Power Management Using Photovoltaic Integrated with CMOS Switches.
LDR
:03700nmm a2200301 4500
001
476252
005
20170614101409.5
008
181208s2016 ||||||||||||||||| ||eng d
020
$a
9781369107203
035
$a
(MiAaPQ)AAI10155649
035
$a
AAI10155649
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Mahto, Rakeshkumar V.
$3
686845
245
1 0
$a
Fault Resilient and Reconfigurable Power Management Using Photovoltaic Integrated with CMOS Switches.
260
1
$a
Ann Arbor :
$b
ProQuest Dissertations & Theses,
$c
2016
300
$a
80 p.
500
$a
Source: Dissertation Abstracts International, Volume: 78-03(E), Section: B.
500
$a
Adviser: Payman Zarkesh-Ha.
502
$a
Thesis (Ph.D.)--The University of New Mexico, 2016.
520
$a
A Photovoltaic (PV) cell is a device which converts light incident upon it to electric current. The push for green energy due to global warming and diminution of fossil fuels opens up a huge market for PV cells. Hence, a lot of interest is being garnered for using PV cells for various applications. However, a PV module's performance degrades due to many anomalies such as failure of individual PV cell within a module, the opening of interconnection, a short circuit in the connection, failure of bypass diode, failure in voltage regulator or partial shading. To some extent all of these issues can be addressed by introducing a transistor as a switch in a PV module. This kind of architecture also enables the PV module to switch between high voltage with low current or high current with low voltage. Moreover, such architecture is handy when PV modules are deployed at remote locations where manual intervention in the case of fault or power management becomes too expensive or impossible. With advancements in semiconductor processing, the MOSFET switches can now be integrated with a PV cell for improved reliability. In this research project, we introduced addressable switches for PV cell that enable the creation of real-time reconfigurable power buses or power island.
520
$a
Moreover, for PV module deployed at a remote location, we have installed an architecture that let the PV module self-detect faulty PV cells or partial shading condition. Such algorithms detect faulty PV cells or PV cells under partial shading within the module such that the performance of the PV module does not become degraded. The algorithms actively use an embedded computing device to predict the output power based on a number of PV cells connected in series and parallel; then the computed power is compared with the measured power for faulty condition detection.
520
$a
Typically, for achieving such kind of computing architecture a single-diode based PV module modeling technique is used. However, all of these modeling techniques have an exponential term due to the presence of a diode, the computing of output power and performance of PV module becomes power intensive and it is difficult to implement on an embedded system. Also, due to the presence of the exponential term, there is no closed form solution for IPV versus VPV (output current of PV cell versus output voltage of a PV cell). We have introduced a PV module modeling using an N-channel MOSFET transistor that doesn't have an exponential term. Moreover, a quadratic equation based solution is obtained that can be solved for calculating the load current. Using the same technique PV module can be also be modeled for various configuration. Additionally, with MOSFET based PV cells modeling enables the modeling CMOS-with-PV which is also presented in this work.
590
$a
School code: 0142.
650
4
$a
Electrical engineering.
$3
183930
650
4
$a
Alternative Energy.
$3
475471
690
$a
0544
690
$a
0363
710
2 0
$a
The University of New Mexico.
$b
Computer Engineering.
$3
686846
773
0
$t
Dissertation Abstracts International
$g
78-03B(E).
790
$a
0142
791
$a
Ph.D.
792
$a
2016
793
$a
English
筆 0 讀者評論
評論
新增評論
分享你的心得
Export
取書館別
處理中
...
變更密碼
登入